Castrol Gear Oils
| PRODUCT NAME | DESCRIPTION | BASE OIL | PERFORMANCE ADDITIVES |
ISOVG @ 40’C | APPLICATION |
| Alpha SP | Mineral | Mineral | EP/AW | 150-680 | Provides basic lubrication & protection |
| Alphasyn T | Full synthetic | PAO | AW | 1420-460 | High temperature, gear & bearings with non-EP performance |
| Alphasyn PG | Full synthetic | PAG | EP/AW | 220 | Medium to high load worm gear & spur gear as well as bearing and circulating system |
| Optigear BM | Mineral with MFT | Mineral | MFT | 320-680 | Spur & bevel gear units, under severe operating condition. Worm gear, rolling and sliding bearings, gear couplings and circulating system |
| Optigearsyn X | Full synthetic with MFT | PAO | MFT | 220-460 | Industrial gear with wide temperature fluctuations, high loads, rolling & sliding bearings, wind turbines, conveyor belts, crane control, lift, rolling mill |
Castrol Hydraulic Oils
| PRODUCT NAME | DESCRIPTION | BASE OIL | PERFORMANCE ADDITIVES |
ISOVG @ 40’C | APPLICATION |
| Hyspin AWS | Mineral hydraulics | Mineral | AW | 32-150 | Use in equipment which requires anti-wear oil |
| Hyspin AWH-M | High VI hydraulics | Mineral | AW | 32-68 | Use in system requiring high & VI wide operating temperature |
| Hyspin HLP | Ashless hydraulics | Mineral | Ashless sulphur phosphorus additive | 32-150 | Use in system where high oxidation stability and lubrication performance are required. |
Castrol Fire Resistant Hydraulics
| PRODUCT NAME | DESCRIPTION | BASE OIL | PERFORMANCE ADDITIVES |
ISOVG @ 40’C | APPLICATION |
| Anvol WG 46 | HF-C type fire resistant hydraulic fluid | Water glycol | AW & corrosion inhibitors |
46 | Applications include furnace doors, die-casting machines, forging machinery and mining equipment. It can be used in vane, gear or piston-type pumps with pressures up to 206.8 bar (3000psi) |
| Anvol SWX 46 | HFDU synthetic type hydraulic fluid | Polyol ester | AW & corrosion inhibitors |
46 | Formulated to work in high pressure hydraulic systems up to 7500psi |
Castrol Slideway Oil
| PRODUCT NAME | DESCRIPTION | BASE OIL | PERFORMANCE ADDITIVES |
ISOVG @ 40’C | APPLICATION |
| Magna SW | Machine tool slideway oil | Mineral | EP/AW | 32-220 | Magna SW 32, Magna SW 68 & Magna SW 220 are commonly used in CNC machines on the railings |
Castrol Compressor Oils
| PRODUCT NAME | DESCRIPTION | BASE OIL | PERFORMANCE ADDITIVES |
ISOVG @ 40’C | APPLICATION |
| Aircol PD | Mineral compressor | Mineral | AW | 32-100 | Lubrication in rotors, bearings & gear in rotary compressors especially in oil flooded screw type bearing. Lubrication drain cycle up to 2000 hrs under normal use |
| Aircol SR |
Full synthetic compressor | PAO | AW | 46-68 | Lubrication in rotary compressor with severe conditions or for normal operation with extended draining period |
Castrol Refrigeration Compressor Oil
| PRODUCT NAME | DESCRIPTION | BASE OIL | PERFORMANCE ADDITIVES |
ISOVG @ 40’C | APPLICATION |
| Aircol AMS 68 | Refrigeration Compressor lubricant | Mineral | R&O | 68 | Suitable for use with ammonia (NH3) as refrigerant |
Castrol Spindle Oil
| PRODUCT NAME | DESCRIPTION | BASE OIL | PERFORMANCE ADDITIVES |
ISOVG @ 40’C | APPLICATION |
| Hyspin Spindle Oil 10 | Mineral without AW | Mineral | R&O | 10 | Designed for use in all types of spindle bearings, including precision machine tool bearings. It is free from anti-wear additives therefore, it is suitable for seal oil systems |
Castrol Turbine Oil
| PRODUCT NAME | DESCRIPTION | BASE OIL | PERFORMANCE ADDITIVES |
ISOVG @ 40’C | APPLICATION |
| Prefecto T | Mineral turbine oil | Mineral | R&O | 32-68 | Conforms to BS 489/DIN 51515 Part 1 |
Castrol Heat Transfer Oil
| PRODUCT NAME | DESCRIPTION | BASE OIL | PERFORMANCE ADDITIVES |
ISOVG @ 40’C | APPLICATION |
| Perfecto HT 5 | Mineral turbine oil | Mineral | N/A | 32 | Use in heat transfer system up to 300°C |
Castrol Quenching Oils
| PRODUCT NAME | DESCRIPTION | BASE OIL | PERFORMANCE ADDITIVES |
ISOVG @ 40’C | APPLICATION |
| Iloquench 32 | Mineral | Mineral | Anti-oxidant | 28 | General purpose accelerated quenching oil ideal for quenching a wide range of steels, including lean alloy types |
| Iloquench 395 | Refined paraffinic mineral | Mineral | Cooling rate accelerators and surface conditioning additives |
29 | Combination of base oils and additives ensures brighter quenched components and free from the carboneous deposits |
Castrol Greases
| PRODUCT NAME | THICKENER | BASE OIL | NLGI | APPLICATION TEMPERATURE RANGE |
PERFORMANCE ADDITIVES |
APPLICATION |
| Spheerol AP | Lithium | Mineral | 3 | -30°C to 105°C | AW | Multipurpose grease for general application |
| Spheerol EPL | Lithium | Mineral | 0,2 | -20°C to 120°C | EP/AW | Multipurpose grease with EP for general application |
| Molub Alloy (MA) 1000 HT | Organic Sodium | Synthetic | 1 | 177°C to 288°C | Solid lubricants/ EP |
Application for minimum residue after evaporation and high VI for additional film strength at elevated temperatures |
| Braycote Inertox 2 | PTFE | Synthetic | 2 | -25ºC to 260ºC | Solid lubricants | For rolling and sliding bearings with extended re-lubrication intervals, high temperatures or under hostile ambient |
| Tribol GR 100 PD | Lithium | Mineral | 00, 0, 1, 2 | -35°C to 140°C | MFT | Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening/wood shaping machines and bearing surfaces of printing plates |
| Tribol GR 400 PD |
Lithium | Mineral | 2 | -30°C to 140°C | MFT | Difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range in highly loaded rolling and sliding bearings. For open gear wheels and worm gears at low speeds |
Castrol Soluble Coolants
| PRODUCT NAME | BASE | DESCRIPTION | CHLORINE | EP | RECOMMENDED CONCENTRATION, % |
CAST IRON | LOW-MEDIUM ALLOYED STEEL |
HIGH ALLOY STAINLESS STEEL |
AL ALLOY | YELLOW METALS |
| Almaredge BI | Mineral | For single sump machines and large systems | Free | No | 4-10 | ✓ | ✓✓ | ✓ | ✓✓ | ✓ |
| Alusol B | Semi-synthetic | Long coolant life & no bacterial smell Non-staining to most aluminum alloys | Free | No | 4-12 | ✓ | ✓✓ | ✓ | ✓✓✓ | ✓ |
| Hysol MB 50 | Semi-synthetic | High performance soluble metalworking fluid which contains an additive package that may help to enhance machining performance and surface finish. It also provides excellent product stability which helps to lower the overall operational costs | Free | Yes | 5-10 | ✓✓ | ✓✓ | ✓✓ | ✓✓ | ✓ |
| Syntilo 9930 | Full synthetic | Typically used in automotive industry (cast iron engine block and transmission, cam and crankshaft), refrigeration and compressor industry and tube rolling/roll grinding |
Free | No | 4-8 | ✓✓ | ✓✓ | ✓ | ||
| Syntilo 77 EF | Full synthetic | Low sticky, less aggressive to paints and superior corrosion protection in comparison to standard synthetic cutting fluids | Free | No | 3-8 | ✓✓ | ✓✓ | ✓✓ | ✓✓ | ✓ |
Castrol Neat Oils
| PRODUCT NAME | DESCRIPTION | VISCOSITY @40°C, CST |
ESTER | CHLORINE | COPPER STRIP TEST |
ACTIVE SULPHUR | INACTIVE SULPHUR |
HEAVY METALS |
| Honilo 981 | Designed for honing and superfinishing of ferrous and nonferrous metals. It can also be used for grinding applications, drilling and general machining of aluminium and yellow metals | 4.8 | Yes | No | 1b | No | No | No |
| Ilocut 154 | Designed for general machining of medium alloyed steel and non-ferrous metals | 35 | Yes | No | 1b | No | Yes | No |
| Ilocut 334 | Designed for general machining of medium alloyed steel and non-ferrous metals. Contains active sulphur and is not compatible with yellow metals | 10 | Yes | No | 4c | Yes | No | No |
| Ilocut 480A | Designed for general machining of cast iron, steel and nonferrous metals. It is especially recommended for use on small automatics, semi-automatics and multi-cut lathes | 14 | Yes | No | 1a | No | No | No |
| Ilocut 603 | Designed for broaching and gear hopping operations of ferrous alloys. This product contains active sulphur and is not compatible with yellow metals |
33 | Yes | No | 4b | Yes | Yes | No |
| Iloform PN 223 | Specially formulated for use in light duty sheet stamping operations where very low residues are required, in most cases eliminating the need for inter process cleaning |
1.6 (20°C) | Yes | No | 1a | No | No | No |
| Iloform PN 224 CF |
Specially formulated for use in light duty light stamping and roll-forming operations where very low residues are required |
1.0 | Yes | No | 1a | No | No | No |
Castrol Corrosion Protective (Rust protection)
| PRODUCT NAME | DESCRIPTION PERFORMANCE | FILM TYPE | FILM THICKNESS (μm) |
INDOOR PROTECTION (months) |
OUTDOOR PROTECTION (months) |
DRYING TIME (mins) |
| Rustilo DWX 21 | Short term protective oily film | Oily | 03 – 04 | 3 | 1 | 60 |
| Rustilo DWX 22 | Medium term protective oily film | Soft greasy | 3.5 – 4.0 | 12 | 6 | 120 |
| Rustilo DWX 30 | Medium term protective oily film | Greasy | 0.6 – 1 | 8 – 12 | 3 – 6 | 30 |